Click image to view full size image
ET 6X1600 slitting machine for light pole machine to get one side bigger one side smaller plate
Quick Detail:
| Name | Other name | Brand Name | CMC |
| Steel plate slitting machine for light pole | Ladder shaped plate cutting machine, Light pole cutting machine, Slitting machine | Feature | Our line can cut the scrap edge of the steel sheet, cut one piece into 3 piece, and get one small size and one big size width |
| Cutting capacity | 2-6mm in thickness 12000mm in length 800-1600mm in width | Usage Industrial | Street light pole industrial |
Description:
The light pole plate slitting machine is base on the rolling shearing principle.
There are two precess step on the machine:
First step is to cut the scrap edge of the hot rolled steel to get the exact width and good edge which is good for light pole seam welding process.
There is a dolly in the front of the slitting unit. It is for control the straight cutting.
Second step is to cutting the light pole taper steel and get one side big one side small width steel plate.
There is a dolly in the cof the slitting unit. It is for control the taper cutting degree. Through changing the base position on dolly to change the taper degree.
Application:
It is for light pole material to cut the scrap edge of the sheet two sides, and slitting the sheet
Bevel cutting Machine For lighting pole production slitting sheet into 3 pieces or 2 pieces
